Pool Deck Resurfacing / Pavers Cost in Southwest Florida (2026)
A typical mid-range pool deck resurfacing / pavers (600 deck area (sq ft)) costs about $7,200–$13,200 installed, based on public 2025–2026 cost data. Use the estimator below for your size, county, and finish level.
Estimate your project
Get 3 local quotes
Free, no obligation. Licensed contractors in your area contact you.
Cost by finish level
| Finish level | Installed cost | Source |
|---|---|---|
| Basic: Resurface / cool-deck overlay | $5–$14 per sq ft | New Age Construction - Pool Deck Resurfacing Cost |
| Mid: Concrete pavers | $12–$22 per sq ft | EstimateFlorida - Pool Deck Cost Estimator (FL 2026) |
| High: Travertine pavers | $18–$30 per sq ft | EstimateFlorida - Pool Deck Cost Estimator (FL 2026) |
Permits
Resurfacing usually needs no permit; new pavers or structural changes may. Check with your county.
By county
- Pool Deck Resurfacing / Pavers cost in Lee County
- Pool Deck Resurfacing / Pavers cost in Collier County
- Pool Deck Resurfacing / Pavers cost in Charlotte County
- Pool Deck Resurfacing / Pavers cost in Sarasota County
- Pool Deck Resurfacing / Pavers cost in Manatee County
- Pool Deck Resurfacing / Pavers cost in Hillsborough County
- Pool Deck Resurfacing / Pavers cost in Pinellas County
FAQ
How much does a pool deck resurfacing / pavers cost in Southwest Florida?
Using public 2025-2026 cost-guide data, a mid-range pool deck resurfacing / pavers of 600 sq ft runs about $7,200 to $13,200 installed. Basic work starts around $5 per sq ft and high-end work can reach $30 per sq ft. These are estimates, not quotes.
Do I need a permit for a pool deck resurfacing / pavers in Florida?
Resurfacing usually needs no permit; new pavers or structural changes may. Check with your county.
Are these prices exact quotes?
No. They are planning ranges compiled from public sources such as HomeGuide and the Remodeling Cost vs Value report. Get written quotes from at least three licensed contractors.
Why are Florida prices different?
Florida building code wind-load and hurricane requirements, product approvals, insurance, and post-storm labor demand can push costs to the upper part of national ranges.